文档详情

八重洲2900M的中文说明(The Chinese description of 2900M).doc

发布:2017-07-17约8.24千字共8页下载文档
文本预览下载声明
八重洲2900M的中文说明(The Chinese description of 2900M) A brief description of the Chinese language of 2900M A manual of instruction manual for instruction manual 1: after the host has been installed, hold down (PWR) button for three seconds to start up, and when the VFO (144.000) is displayed, you can perform any operation you need. 2: SET the manual automatic under poor: under the mode of display VFO hold MHZ (SET) button 3 seconds to enter the main menu, gyration (DIAL) knobs to fourth menu (ARS), gently press (MHZ SET key to enter the fourth main menu selector switch manual automatic under poor (ON/OFF), SET up after the completion of light (MHZ SET button from the menu. 3: SET difference frequency: under the mode of display VFO hold MHZ (SET) button 3 seconds to enter the main menu, gyration (DIAL) knobs to 43 (RPT) menu, gently press (MHZ SET key to enter the menu Settings fluctuation difference frequency (RPT, + RPT, OFF) 4: SET the differential frequency value: hold in display VFO mode (MHZ SET button for more than 3 seconds to enter the main menu, gyration (DIAL) knobs to 46 (SHIFL) menu item, gently press (MHZ SET key to enter the menu after setting the difference frequency value (7.6 MHZ), the machine is the default value is 7.6 MHZ, gyration (DIAL) knobs SET difference frequency values, you need SET up after the completion of light (MHZ SET button to launch the main menu. 5: SET the TONE code: hold in display VFO mode (MHZ SET button for more than 3 seconds to enter the main menu, gyration (DIAL) knobs to 49th item (SQLTYP) menu, gently press (MHZ SET key to enter the menu Settings you need coding, generally choose (TONE) coding (TONE/TSQL/DCS/RVTN/OFF) 6: SET the tone value: hold in display VFO mode (MHZ SET button for more than 3 seconds to enter the main menu, gyration (DIAL) knobs to 52 () menu item, gently press (MHZ SET key to enter the menu (100 MHZ) SET the tone, after turn (DIAL) knobs SET the note values you need. 7: store channel: in VFO mode, with th
显示全部
相似文档