塑料板地面施工艺标准(709-1996)（Standard for plastic board flooring (709-1996)）.doc

塑料板地面施工艺标准(709-1996)（Standard for plastic board flooring (709-1996)） Standard for plastic board flooring (709-1996) Range The process standard is applicable to the ground surface layer of industrial and civil buildings. Construction preparation 2.1 materials and main equipment: 2.1.1 plastic board: plate surface should be smooth, smooth, crack free, uniform color. Thickness consistent, flat edge, the board should not be debris and bubbles, and should meet the technical indicators of the product, enter the factory to have the certificate. 2.1.2 plastic coil: material and color meet the design requirements. 2.1.3 in the transport of plastic plates and coils, should prevent sun, rain and impact; in storage, should be stacked in dry, clean warehouse, and away from the heat source 3M, its ambient temperature should not be greater than 32 degrees. 2.1.4 adhesives: should be based on the laying of materials and surface materials used by the requirements of the test to determine. Adhesives should be kept in a cool, ventilated, dry room. Products that exceed the production period of three months shall be checked by sampling and qualified before use. Products that exceed the shelf life shall not be used. Adhesive can use ethylene (polyvinyl acetate emulsion), chloroprene rubber, polyurethane, epoxy resin, synthetic rubber, solution type, asphalt and more than 926 functional building adhesive. Should be kept in a cool place, avoid direct sunlight, and isolate the fire source. 2.1.5 cement should adopt Portland cement and ordinary portland cement, and its label shall be no less than 425. 2.1.6 xylene, acetone, nitro diluent, alkyd diluent, gasoline, soft wax etc.. 2.1.7 polyvinyl acetate emulsion, 107 glue. 2.2 operating conditions: 2.2.1 plumbing line has been installed and has been tested qualified. Comply with the requirements after the completion of acceptance procedures. 2.2.2, the top wall or wall paper and paint spraying all finished work. 2.2.3 indoor decoration and pai