钢门窗安装工艺标准(802-1996)（Standard for installation of steel doors and windows (802-1996)）.doc

钢门窗安装工艺标准(802-1996)（Standard for installation of steel doors and windows (802-1996)） 1, the process standards applicable to industrial and civil construction of wooden doors and windows installation. 2 、 construction preparation 2.1 materials and main equipment: 2.1.1 wooden doors and windows: wooden doors and windows processing model, quantity, processing quality must comply with the design requirements, there are factory certification, and should be required wood doors and windows made of wood moisture content should not be greater than 12%. 2.1.2 wooden yarn doors and windows: wooden doors and windows should be matched with the processing, models, quantities and sizes meet the design requirements, there are factory certification, yarn should be cut with the mouth of the skin matching, the small nails should be supplied with matching. 2.1.3 preservatives: sodium fluosilicate, its purity should not be less than 95%, moisture content is not greater than 1%, fineness requirements should be all through the 1600 hole /cm2 sieve. Or dilute the cold base oil, besmear wood surface and wall contact parts. 2.1.4 for the solid wall door window frame, wooden embedded parts and other connections shall comply with the design requirements. 2.1.5 hardware and accessories of the type, specifications, models must meet the requirements of the drawings, and with the doors and windows, frame matching fan. And product quality must be qualified products 2.1.6 main equipment: rough planing, fine cutting and planing, planing, planing, sawing, single hammer, axe, screwdriver, line , flat shovel, feeler, line sinkers, red bag, ink fountain, drills, saws, small wooden board, broom and other burdens. 2.2 operating conditions: 2.2.1 doors and windows to enter the site must be checked and accepted. Doors, frames and fans should be checked before installation, model, size meets the requirements, whether or not channeling, twisting, bending, splitting, if any of the above should be repaired. 2.2.