云雾室空气采样系统特点概览.doc
文本预览下载声明
IFD-Incipient Fire Detector空气采样式火灾探测器概览
IFD Cirrus Pro系列空气采样式火灾探测器概览
The new range of Cirrus Pro Series Aspirating Fire Detectors provide a solution for almost any aspirating system project, from a simple single pipe detector with minimum ‘Fire’ and ‘Fault’ LED indications to a multiple pipe scanning detector with multifunction quarter VGA backlit LCD display. Programming for each detector is via a laptop computer or from an onboard or remotely mounted LCD display.
从简单的只有“火警”和“故障”指示的单管单区域探测器,到具备多区域扫描功能和多功能VGA背光液晶显示屏的多管探测器,新一代Cirrus Pro系列空气采样式火灾探测器几乎为所有的空气采样式火灾探测系统提供全面的解决方案。通过一个笔记本电脑,或自带显示屏,或远程安装的液晶显示屏,就可以为每个探测器进行编程。
Cirrus Pro 100
‘Cloud Chamber’ aspirating fire detector
For use with up to a total of 100mtrs of 25mm diameter sampling pipe
Single sampling pipe ‘inlet’ port, single sampling pipe ‘exhaust’ port
LED status indication of Common Fault, Power, Pre-alarm, Fire 1, Fire 2, Fire 3 alarm conditions
Internal buzzer ‘Silence’ button, detector alarm ‘Reset’ Button
May be networked with other Cirrus Pro Series aspirating detectors
Cirrus Pro 100
云雾室型空气采样式火灾探测器。
使用25毫米口径的取样管,最长可达到100米。
单管进气,单管排气。
LED指示灯显示状态包括:故障,电源,预报警,火警1,火警2,火警3。
内部蜂鸣器“静音”按钮,探测器报警“复位”按钮。
可与其他Cirrus Pro系列探测器进行网络连接。
Cirrus Pro 200
‘Cloud Chamber’ aspirating fire detector
For use with up to a total of 200mtrs of 25mm diameter sampling pipe
Four sampling pipe ‘inlet’ ports, single sampling pipe ‘exhaust’ port
LED status indication of Common Fault, Power, Pre-alarm, Fire 1, Fire 2, Fire 3 alarm conditions
Internal buzzer ‘Silence’ button, detector alarm ‘Reset’ Button
May be networked with other Cirrus Pro Series aspirating detectors
Cirrus Pro 200
云雾室型空气采样式火灾探测器。
使用25毫米口径的取样管,最长可达到200米。
四管进气,单管排气。
LED指示灯显示状态包括:故障,电源,预报警,火警1,火警2,火警3。内部蜂鸣器“静音”按钮,探测器报警“复位”按钮。
可与其他Cirrus Pro系列探测器进行网络连接。
Cirrus Pro 200D
‘Cloud Chamber’ aspirating fire detector
For use with up to a total of 200mtrs of 25mm diameter sampling pipe
Four sampling pipe ‘inlet’ ports, single sampling pipe ‘exhaust’ port
LED status indica
显示全部