项目英文名称.doc

项目英文名称 1)Upper Deck -Cross deck plating Under deck structure TM6 -drawing: Cross deck plating under deck beams *No.1 Hatch Fwd *Between No.1 No.2 Hatch *No.7 Hatch After [Cross deck plate] [under deck beam/ girder] *或 Cross deck plating : 1,2,3,4……xx Under deck structure : S1, S2, S3…….SXX , G1, G2, G3……GXX -Main deck plating -Strack ‘A” TM1 -drawing: Main deck plating *Amidships 2) Side Shell - Wind Water strake “A” TM1 -Wind Water strake “B” -drawing: Selected wind Water strake outside the cargo area Wind Water strake *Amidships 3) Bottom Shell plating -Bottom plate within the cargo length area TM1 -Strake “ K ” , Strake “ A “….. -drawing: Bottom plating *Amidships 4) Trans. Section -Fr. No. XX / XX TM2(i) -Drawing : Trans. Section in No. * At Fr.100-101 *Stringer plate *1st ~5th…Strake inboard *Sheer strake *TOPSIDE TOTAL -Fr. No.** TM2(ii) *1st~5th Below sheer strake *Keel strake *BOTTOM TOTAL -Fr. No.** TM3 *Inner bottom plate/longi. *Hopper plate/longi. *Bottom longi. / Side shell longi. *Topside tank sloping plate/longi. *Deck girder/ longi *Center girder *Side girder 5) F’cle Deck -F’cle deck plating TM6 -drawing: F’cle deck plating *Plate 6) Hatch Coaming -No.** Cargo hold TM6 -No.** Hatch -drawing: Hatch coaming Stays in way of No.** Hatch *Hatch coaming plate *Hatch coaming stays 7)Hatch Cover -No.** Cargo hold TM6 -No.** Hatch *Hatch cover (top plate) *Hatch cover (side plate) *Hatch cover (bottom plate) * Hatch cover under stiffeners -drawing: Hatch cover in way of No. ** Hatch 8)Hold Frame -No. ** Cargo hold TM7 TM7 (URS31) -Hold frame -drawing: Cargo hold frames / (URS31) *UPPER PART Fr. ** S-shell, W-web, F-face, W1-web,F1-face, *MID PART Fr. ** S-shell, W-web F-face, *LOWER PART Fr. ** S-shell, W-web, F-face, W1-web ,F1-face, *ZONE A Fr. ** *ZONE B Fr. **