专业工程管理与实务(建筑工程)(一级建造师)精讲班第26讲课件讲义（Professional engineering management and Practice (Construction Engineering) (a construction division), fine lectures, twenty-sixth lectures, courseware, handouts）.doc

专业工程管理与实务(建筑工程)(一级建造师)精讲班第26讲课件讲义（Professional engineering management and Practice (Construction Engineering) (a construction division), fine lectures, twenty-sixth lectures, courseware, handouts） Professional project management and Practice (construction) (a) class twenty-sixth courseware handouts about.Txt26 choose self-confidence, is to choose easy, is the choice of its fame in front, is to choose the forces in front of distraction confident sail go with head high and chest out, breaking the flow before the shows style fighting. Professional project management and Practice (construction) (a) class twenty-sixth (China courseware handouts about construction division examination network) Professional project management and Practice (construction) (a) class twenty-sixth Lecture Notes The first section of the 1A414072 master the technical requirements of glass curtain wall construction and method 1A414072 master the technical requirements of glass curtain wall construction and method 1A414073 master the technical requirements for metal and stone curtain wall construction and method [questions] typical hidden frame glass curtain wall structural silicone sealant adhesive thickness should be not less than (). A.4mm B.5mm C.6mm D.7mm Answer: C Solution: hidden frame, semi hidden frame glass curtain wall structural silicone sealant bond width and thickness should be determined according to the calculated thickness should not be less than 6mm, and should not be greater than 12 mm; width of not less than 7 Mm, and should not be greater than 2 times the thickness is greater than the thickness of the. So the right option for the C. [] typical examples commonly used in building curtain wall plate embedded anchor plate should be used (). A.HPB235 B.HRB335 C.Q235 D. cold drawn steel bar Answer: C Solution: building curtain wall embedded parts with a flat shaped groove and two flat, which is the most widely used embedded parts. Processing requirements: flat embedded anchor plate s