通力参数（Kone parameter）.doc

通力参数（Kone parameter） Basic settings Menu function notes 1-1 base station 1N 1-2 control mode 1 = SBC single button 2 = DC select 3 = FC complete select 4 = PB button 1-10 opened the door to door fully opened to start closing time in seconds (160) 1-11 re opening time, re open the door, the back door completely open until the beginning of the closing time of the unit 0.1 seconds (1-99) 1-12 activate the ADO, open the door ahead of schedule, turn off the 0 pass and turn off the 1 1-13 forced closing door is blocked, certain time back door with large force slow closing, 0 close, 1 open 1-14 force the door to limit the time after which the door is blocked and begin to close (10-60) 1-15, the new election, quick door closed, re opened the door, the car has a new election, the door closed quickly, 0 off, 1 open (0.1-99 seconds) 1-16 light eye delay door closes 0.1 hours (0-99) after closing time blocked eyes 1-17 light eyes, normally fast closed, light eyes blocked, and when the light eye is normal, the door closes quickly, 0 closes, 1 opens 1-18, open the door at the same time, when there are front and rear doors, 1 A doors open 2 B, 3 doors open at the same time 1-19 pairs of open doors, whether to open the door 0, no 1 1-20 doorbell for the blind choose doorbell 0 No 1 1-21 expand the time to open the door 0= button (there is extended re opening time), 1= switch has a buzzer, 2= switch, no buzzer 1-22 1-30 stop floor 1-31 stop the ladder, open the door 0 pass, 1A open, 2B open, 3AB open 1-32 how long does the elevator stop? How long does it take to start the stop? Seconds per unit (1-99) 1-33 stop way, 0= pass, 1= single stop, ladder 2= group 1-34 automatically from the specific layer of the elevator ladder free, lift off the floor 0 back to the main floor NN= designated floor 1-35 automatically return to a specific floor 1-40 allows reverse internal selection, 0= off, 1= open 1-41 delete the error election, when the two election, no entry and exit, delete the election