车刀参数资料（Tool parameter data）.doc

车刀参数资料（Tool parameter data） The tool type and use tool is one of the most widely used tool. Is learning, analysis of various types of tool. The tool used for various lathes, machining holes, surface, thread, slot cars etc.. According to the structure can be divided into the whole lathe tool, welding tool, machine tool, clamp and cutter indexable turning tool. The increasingly widespread application of indexable turning tool for turning in, gradually increase the proportion of. The so-called turning tool two, welding type welding hard alloy, carbon steel rod is in according to the requirements of cutting tool geometry out groove, solder hard alloy blade is welded on the cutter groove, and according to the geometric parameters of the selected tool edge grinding after use. Three, 30CrMnSiA 30CrMnSiA is the ordinary blade, using the mechanical clamping method will be used in the knife blade clamping tool rod. This knife has the following characteristics: (1) the blade without high-temperature welding, avoid the blade hardness caused by welding, crack down, improve the durability of the tool. (2) because of the increase of tool life, the use of a longer time, tool change time, improve production efficiency. (3) the knife rod can be used repeatedly, saving steel and improve the utilization rate of the blade, the blade by the manufacturer recycling, improve economic efficiency, reduce the cost of tool. (4) blade grinding, the size will gradually become smaller, in order to restore the blade position adjusting mechanism, often with the blade in the tool structure, to increase the number of heavy grinding blade. (5) the end of the blade pressing plate, can play a role of broken chip. Four, turning tools with indexable turning tools with indexable inserts is machine tool clamp. A cutting edge blunt after the new cutting edge quickly replaced transposition of adjacent, you can continue to work, until all the blade cutting edge are blunt, blade to scrap recycling. The replaceme