F822开局-命令行操作（F822 start - command line operation）.doc

F822开局-命令行操作（F822 start - command line operation） To create F822 on OLT devices, please refer to: F822 is divided into two types: 24POTS + 24ETH and 16POTS + 16ETH. The equipment panel silk has F822 representing 24POTS + 24ETH, f822-16 represents 16POTS + 16ETH, please indicate the difference. The previously added ZTE - F822 is unified as the onu-type of the 24 line, and ZTE - f822-16 as the onu-type of the 16-line. Note: the added property is auto - dispatch - set ZTE - F822 disable, which is prohibited automatically. Routing (note: only a remote configuration is the best route to the local network server), and configure a default route to avoid, remote login other routing equipment configuration, is configured after save. The purpose of the shutdown is to override the routing information on the new configuration after the ONU restarts the routing configuration information on OLT, so the data on ONU must be saved. # pon ZXAN (config) Add 16 F822 - onu type information to the ZXAN (config-pon) # onu-type epon f822-16 description 16:16 ZXAN (config-pon) # onu - if ZTE - f822-16 eth_0/1-16, if this command is not made in OLT system, it will not be added when configuring onu broadband port VLAN, and will prompt no ETH_... ZXAN (config - pon) # onu - if ZTE - F822-16 pots_0/1 to 16 The ZXAN (config-pon) # onu-type epon f822-24 description 24:24 adds 24 f822-onu type information ZXAN (config - pon) # onu - if ZTE - F822-24 eth_0/1-24 ZXAN (config - pon) # onu - if ZTE - F822-24 pots_0/1-24 The (config-pon) # onu-type epon F803 description 16FE ZXAN (config - pon) # onu - if F803 eth_0/1 to 16 ZXAN (config - pon) # exit ZXAN # exit (config) ZXAN# write Tim zhangRegister ONU for ONU HYS - JFL - the C200 # configure terminal Enter configuration commands, one per line. End with CTRL/Z. HYS - JFL - the C200 # (config) Hys-jfl-c200 (config) # show onu unauthentication epon_0/3/1 [view the unregistered onu under the first PON of the third piece of PON] 2. The onu-t