Li16Mn16O4酸洗后离子筛在盐湖卤水中的吸附性能-中南大学学报.PDF
文本预览下载声明
第 44 卷第 3 期 中南大学学报(自然科学版) Vol.44 No.3
2013 年 3 月 Journal of Central South University (Science and Technology) Mar. 2013
Li Mn O 酸洗后离子筛在盐湖卤水中的吸附性能
1.6 1.6 4
石西昌,张志兵,周定方,周喜诚,唐天罡,尹世豪
(中南大学 冶金科学与工程学院,湖南 长沙,410083)
摘要:通过对前躯体 Li Mn O 酸洗制备离子筛进行正交实验分析,得出最优化的酸洗条件,然后分别应用伪
1.6 1.6 4
一级、伪二级动力学方程对吸附过程进行研究,考察离子筛对卤水中各主要金属离子的分离性能以及在卤水中的
循环吸附性能,对离子筛吸附锂、脱锂后样品进行锰平均化合价及锂锰摩尔比测定。研究结果表明:最优酸洗条
件为酸洗温度 70 ℃,搅拌速率 500r/min,酸洗时间24 h,盐酸浓度 0.5mol/L,液固比400 mL/g。此实验条件下
得出锂的迁出率为 96.28%,锰的溶损率为 7.46%。酸洗后所得离子筛对锂离子有较好的特定选择性;离子筛对
+
Li 的吸附过程服从伪二级动力学方程,即为化学吸附过程;离子筛有较优异的循环吸附性能;离子筛的实际吸附
容量只有其理论容量的 1/3,离子筛始终未达到最大饱和吸附容量。
关键词:Li Mn O ;前躯体;离子筛;酸洗;吸附;循环性能
1.6 1.6 4
中图分类号:TB34 文献标志码:A 文章编号:1672−7207(2013)03−0892−09
Adsorption performance of ionsieve obtained after
Li Mn O pickled in brine
1.6 1.6 4
SHI Xichang, ZHANG Zhibing, ZHOU Dingfang, ZHOU Xicheng, TANG Tiangang, YIN Shihao
(School of Metallurgical Science and Engineering, Central South University, Changsha 410083, China)
Abstract: The process that Li Mn O was pickled for ionsieve was first investigated by orthogonal experiment, Then
1.6 1.6 4
the adsorption process was studied by pseudofirstorder and pseudosecondorder kinetics equation, respectively. The
separation performance of the ionsieve for the main metal ions in brine and its cyclic adsorption performance were
investigated. Finally, the average valences of
显示全部