30t吊钩桥式起重机设计.doc
文本预览下载声明
任务书
30t吊钩桥式起重机设计
1.设计的主要任务及目标
根据课题要求进行调查研究,确定主要的技术参数;
拟定总体方案,并进行论证;
进行起重机传动设计,选择合理的传动部件;
零件设计及结构设计、计算并绘图
主要参数:厂房宽度50m;最大起重载荷30t;采用通用吊钩桥式起重结构
2.设计的基本要求和内容
毕业设计计算说明书一份;
零件图若干张;
吊钩桥式起重机结构装配图;
吊钩桥式起重机总体尺寸图;;
3.主要参考文献
[1] 严大考、郑兰霞主编,起重机械[M].郑州:郑州大学出版社,2003,9.
[2] 余维张主编,起重机械检修手册[M].北京:中国电力出版社,1998,11.
[3] 杨长睽,傅东明主编,起重机械(第2版)[M].北京:机械工业出版社,1992,5.
[4] 张莹主编,机械设计基础[M].北京:机械工业出版社,1997,7.
4.进度安排
设计(论文)各阶段名称
起 止 日 期
1
进行调查研究,查阅资料,完成开题报告
2014.02.15—2014.03.08
2
拟定、论证吊钩桥式起重机设计方案
2014.03.9—2014.04.012
3
确定主要的技术参数,吊钩桥式起重机传动设计
2014.04.13—2014.04.22
4
吊钩桥式起重机结构设计结构装配图、主要零件图
2014.04.23—2014.05.23
5
撰写并编制论文、打印,准备毕业答辩资料
2014.05.25—2014.06.5
30t吊钩桥式起重机设计
摘要:桥式起重机是一种提高劳动生产率重要物品搬运设备,主要适应车间物品搬运、设备的安装与检修等用途。我国生产的吊钩电动双梁桥式起重机额定起重范围为5~500t,一般10t以上,起重机有主、副两套起升机构;300t以上,起重机还有三套起升机构。
电动双梁起重机由桥架、小车运行机构、大车运行机构和电气设备构成。在系统整体设计中采用传统布局的典型结构,小车运行机构采用集中驱动。起升机构滑轮组采用双联滑轮组,重物在升降过程中没有水平移动,起升过程平稳,且钢丝绳的安装和更换容易。相应的卷绕装置采用单层卷筒,有与钢丝绳接触面积大,单位压力低的优点。在起升机构中还涉及到钢丝绳、减速器、联轴器、电动机和制动器的选择等。小车运行机构中涉及小车轮压计算、小车车轮、小车轨道、减速器、联轴器、电动机和制动器的选择计算等。
关键词:桥式起重机,起升机构,小车运行机构
30 tons of hook bridge crane design
Abstract:Bridge crane is a significant increase labor productivity goods handling equipment, primarily to carry goods workshops, equipment installation and maintenance, and other purposes. Chinas production/ of electrical hook rated double-beam bridge crane lifting the range of 5 ~ 500 t, generally more than 10 t, cranes are the main, two sets of lifting 300 t above, there are three sets of cranes lifting bodies.
Two-electric beam from the bridge crane, the trolley running, traveling mechanism and electrical equipment constituted. The overall design of the system using the traditional layout of the typical structure and operation of institutions used car driven focus. Pulley group or agency from using double-pulley blocks, heavy objects in the process of lifting the level of no movement, or from the process smooth, and the installation and replacement of wire rope easily. Winding installations in
显示全部