ROS常用命令（国外英文资料）.doc

ROS常用命令（国外英文资料） ROUTEROS commonly used commands / sy reset the routing primitive state / sy reboot reroute / sy / sy ide set name = machine name for machine name / export view the configuration / IP export to view the IP configuration Sy/backup enter Save name = you want to set up the file name backup route LOAD NAME = you want to set the file NAME to restore the backup / interface print to view the network card status So 0, X, ether1, ether 1, 1500 this is the network card that didnt open 0 R ether1 ether 1500 thats normal / int en 0 activates 0 network card / int di 0 bans the 0 card / IP fir con print looks at all the current network edges / IP service set WWW port = 81 changes the WWW service port to 81 / IP hotspot user add name = user1 password = 1 to increase the user 1, how often do you log in? A common help command lists available commands and simple instructions. Some English commands are long enough to be abbreviated as interface, and when you enter in, you will automatically enter the interface. Or you can press the TAB key to help you get the input from the long English command. Some commands have a lot of parameters. When you dont know, you can enter a command and add a space. , such as print? The parameters of the command can be displayed. The setup command should be remembered because the router OS had to be initially installed with the IP address of the network card. IP route add gate = 211.12. *.14,220.163. *.12 this command is used for multiple gateways when multiline access is used. The IP firewall add action = NAT protocol = TCP dst-address = TCP dst-address = 212.12.*. * / 32:8 0 to -dst-address = 98. This command is used on the mapping port 80 to the local 98. The print command is a bit of a listing for all the projects. 8, interface monitor - traffice 0, can monitor the current 0, the activities of the network card. The IP firewall connection print displays all the current connections. IP arp print shows the corresponding list of IP addresses