Inspection of Dimensional accuracy of the Solar-Glass-Sheets at avim玻璃检查操作指导.doc

Task / Objective目的 Ensuring that all the glass used in the production is complying with this specification. 保证所使用玻璃符合此操作指导要求。 Scope of Application范围 avim Solar Production Co. Ltd; Gaomi / China. 埃孚光伏制造有限公司；高密/中国。 Definitions术语和定义 None 无 Responsibilities职责 The employees working in glass-washing procedure is responsible for conducting the inspection according to this instruction; 生产部玻璃清洗工序员工负责按照此操作指导规定进行检测； he Quality-technician production is in charge of checking the inspection; 质量巡检员对检测过程进行监督； The workers at the glass washing station collect the sorted-out glass on a pallet with special marking; 玻璃清洗工序员工将挑选出的玻璃放置托盘内，并用醒目的标识注明。 Quality-technician production confirms the sorting and disqualified glass will be blocked. 质量巡检员要确保挑选出的玻璃被封存。 Description描述 Inspection instruction 检查指导 Perform the inspection of the solar-glass-sheets in process. 玻璃在使用过程中检查。 The glass-sheets are inspected while positioned on the separate work-table with black sheet. 要求将玻璃放在单独的工作台上检查。 How to proceed with sorted-out glass follows the process-instruction P1-830-QMS-01 “Control of nonconforming products“. 挑选出的不合格品的处理依照程序文件“不合格品控制程序”。 Inspection criterion 检查项目 Allowable Tolerance 允许误差 Inspection equipment: 检测设备 Inspection-Frequency 检测频率 Dimension 尺寸 Lateral edge a 侧面a ± 1,0 mm Measuring-Tape 卷尺 First 1 glass-sheets of each pallet; 每托盘 最初一片玻璃 1 glass-sheets out of the middle of each pallet, 每托盘 中间一片玻璃1 glass-sheets at the end of each pallet,每托盘 最后一片玻璃 One criterion at each inspection, 每次检测使用同一依据 Lateral edge b 侧面b ± 1,0 mm Measuring-Tape 卷尺 Angula-rity 对角线 Diagonal Difference [X-Y] 对角线之差 = 2 mm Measuring-Tape 卷尺 Inspection criterion: (Continue) 检查项目 Allowable Measure: 允许尺寸 Allowable Quantity: 允许数量 Inspection equipment: 检测设备 Inspection-Frequency 检测频率 Quality of Glass 玻璃质量 Core flaw(Inclusions) 杂质 1 to 3mm 1 Visual Inspection 目测 Each piece of Glass-sheet 每片玻璃 Round Bubbles 圆形气泡 2 to 3mm 1 Visual Inspection 目测 3mm 0 Visual Inspection 目测 Length of Scratch(wideness 1