安全u盘使用说明书(英文版).doc

User Manual USB2.0 Medisk usage 1.New Disk Initial PIN is 112233. 2.Press Key button(both redgreen LED blink),PIN input Press key(green LED blink) to confirm disk unlocked,plug into PC and start to use.Once pull out from PC,MeDisk locks automatically. 3.Set PIN:After unlock by default PIN,press the key button for 3 seconds(both redgree LED illuminate),enter a new PIN Press Key(redgreee blink in unison),re-enter the PIN Press key(green LED inlluminate),the new PIN is accepted and successful. Change PIN same as set PIN. Indicators LED Indicators Green Blinking Unlocked Constant green Connected to PC Red Blinking Invalid operate Constant red Reset Red green blink together Accepting PIN input Alternating red green blinking Error Constant redgreen together Accepting new PIN Blue Led Working All LEDs off Sleeping Special Features 1.If no attaching to Pc within 30seconds,disk will be re-locked. 2.When PC in sleep mode,disk also in sleep mode.All indicators will be off. 3.After 10 consecutive incorrect PIN attemps,disk is reset and data will be erased.Now press key for 3 seconds,reset PIN and plug into PC will require reformatting. 4.Reset:press “9 “and hold the key simultaneously for 3 seconds.Enter 110 and then press key.Disk will be reset,return to default state,but PIN has been erased.For reuse disk,pls set a new PIN and reformat disk. Notice 1.Don’t forget PIN.The losted PIN and data cannot be broken by manufacture factory.Reuse disk either remember PIN or reset disk. 2.Don’t worry about internal battery.Batterycan be used about 10 years.Batter will be charging when plug into PC. 3.PIN required 6-15 digits in length,except consecutive digits”1234567890”or sole digit”888888”. Others 1.Without PC to set PIN and unlock the disk,avoid the PIN stole by hacker. 2.MeDisk with zinc alloy shell and advantage of waterproof,dustproof and shock resistant.