精馏脱氨在高浓镍冶炼氨氮废水处理中的应用.PDF
文本预览下载声明
第 34卷
第 6期 有 色 冶 金 设 计 与 研 究 2013
12 月
精馏脱氨在高浓镍冶炼氨氮废水处理中的应用
罗 路
(中国瑞林工程技术有限公司。江西南昌330031)
(摘 要]以某镍冶炼企业高浓氨氮废水处理工程为例,阐述了精馏脱氨处理镍冶炼高浓氨氮废水系统的
工艺流程和设备选型,分析了影响系统运行的主要 因素。工程实践证明,该系统操作简单,占地面积小,运行稳
定,去除率高,废水中99%以上的氨回收制备高纯氨水,循环回用于生产,实现了氨氮废水的资源化回收利用。
[关键词]氨氮废水;精馏 ;脱氨 ;高纯氨水;资源化 回收利用
中图分类号:X703 文献标识码:B 文章编号:1004-4345(2013)06—0099—03
ApplicationofRectifyingandDeamination inTreatmentofAmmoniaNitrogenW asteW ater
OfHighConcentrationNickelSmelting
LU0 Lu
(ChinaNerinEngineeringCo.,Ltd.,Nanchang,Jiangxi330031,China)
AbstractTakingaprojectofhighconcentrationammonianitrogenwastewatertreatmentinanickelsmeltingenterpriseasan
example,the papersummarizesprocessflow and equipmenttype selection ofrectifying and deamination for processing high
concentrationammonianitrogenwastewatersystem ofnickelsmelting,andanalyzesmainfactorofaffectingsystem operation.Itproves
by engineeringpractice thatthe system hasadvantagesofsimple operation,smallfloorarea,stablerunningandhigh removal
efficiency;over99% ammoniainwastewatercanberecoveredforpreparationofhighpurityammoniaandappliedforproduction,by
whichresourcerecoveryandapplicationofammonianitrogenwastewatercanbeachieved. .
Keywords ammonianitrogenwastewater;rectifying;deamination;highpurityammonia;resourcerecovery andapplication
某镍冶炼企业氨氮废水浓度高冶氢氮约为2g/L), 再生液需再处理,操作复杂。通过设计人员多方案比
且含有Ni、As重金属离子。针对该废水特点 测废水 选和调查,最终采用精馏脱氨工艺。本文拟结合该项
进行脱氨预处理。再中和处理去除废水中重金属离子, 目阐述精馏脱氨的技术特点及工程应用。
最终处理后的排出液全部回用于生产。目前降低废水
氨氮方法主要有吹脱法、蒸氨法、生物硝—反硝化法、 1 精馏脱氨的技术特点
化学沉淀法、离子交换法、折点氯化法。吹脱法、蒸氨
精馏是利用组分挥发度差异、借助 “回流”技术
法多用于高浓度氨氮废水,但出水达标困难.且存在
实现混合液高纯度分离的多级分离操作,即同时进行
二
显示全部