钢丝绳斜拉索与工字钢悬挑梁组合平台体系上搭设模板支撑架的施工技术.doc

钢丝绳斜拉索与工字钢悬挑梁组合平台体系上搭设模板支撑架的施工技术 李玲 ，姚纪平，井谢谢，杨凯， （内蒙古兴泰建筑有限责任公司，内蒙古 鄂尔多斯 017000） 作者简介——姓名：李玲；性别：女；民族：汉；出生年月：1979年3月；毕业院校：内蒙古工业大学；学历：大专；从事专业：建筑工程；单位及职务：内蒙古兴泰建筑有限责任公司副经理；专业技术资格：中级工程师；email：jingxie_123@126.com。 课题立项——课题名称：组合平台体系上搭设模板支撑架施工技术的研究；课题编号：XTJYF-03。 [摘要]通过钢丝绳斜拉索与工字钢挑梁及系杆形成的模板架支撑平台, 有效的解决了高空悬挑结构的施工,并且该技术简单易行,经济合理,缩短了工期,取得了良好的社会效益和经济效益。其技术点在于混凝土悬挑结构下两层结构楼板上设置悬挑工字钢梁，每道工字钢悬挑梁外端设两道与其上一层主体结构拉结，利用钢丝绳斜拉索吊拉载荷，然后在工字钢悬挑梁与钢丝绳斜拉索组成的组合平台体系上搭设模板支撑架。 [关键词悬挑结构；钢丝绳斜拉索；组合平台；模板支撑架 Wire and cable I iron cantilever beam combination platform on erection of formwork supporting frame system construction technology Li ling，Yao Jiping,Jing Xiexie,Yang Kai （Inner MongoliaXingtaiConstructionLLC，Erdos，Inner Mongolia 017000，China） The first author introduction——Name:Li Ling;Gender: female; Nationality: han,;Birth: March 1979; Graduate School: Inner Mongolia university of technology; Record of formal schooling: college; engaged in professional: construction; units and positions : Inner Mongolia hing construction co., LTD. Deputy general manager; professional and technical qualifications: Intermediate engineer; email：jingxie_123@126.com。 Subject project —— Project name: Combination platform on erection of formwork supporting frame system construction technology research ; Issue number：XTJYF-03. Abstract:Through the wire and cable i-steel beam and tie bar form template frame supported platform, effectively solve the high altitude construction of cantilever structure, and this technology is simple, economic and reasonable, shortening the time limit for a project, achieved good social benefits and economic benefits. The technical point is that concrete cantilever structure floor set on two layers of structure under the cantilever beam, each joist steel cantilever beam end supposes two with a layer of the main structure Rachel using wire rope hoisting cable tensile load, and then in the beams cantilever beam and the combination of wire rope of the stay cables of the platform