理光打印机维修代码（Light printer maintenance code）.doc

理光打印机维修代码（Light printer maintenance code） 1. SP maintenance mode Into the way: the C 107 CV key press more than 3 seconds, enter 1, copy, and then press the required Numbers into the way of maintenance, exit according to the yellow one copy of the C key to get into the normal way SP1 (feed mode) 001: the head edge is opposite to the position [-9.0-9.0/0.1mm/level] [1] carton delivers paper, [2], paper, [3], double-sided paper 002: right and left aligned [-9.0-9.0/0.1mm/level] [1] first paper, [2], [3], [3], [4], [4], b0, [6] 003: time the paper, adjust the bending of the paper. [1] first carton delivers paper [0-10/5/1 MM/level] [2], 2, 3, 4 [0-10/5/1 MM/level] [3] hand feed [0-10/5/1mm/level] [4] double side [0-20/6/1mm/stage] 007: display of paper size 103: motion of the fixed shadow [0 = no / 1 = is] Adjustable [1] standby [160-190/175/1 degree/level] [2] energy level 2 [0-100/60/1 degree/level] 106: the fixing temperature shows The adjustment of [1] for fixing the soft start of the fixing system [0 = 3 cycles / 1 = 10 cycles / 2 = 20 cycle [2] standby [0 = 3 cycles / 1 = 10 cycles / 2 = 20 cycles 108: adjustment of fixing soft start [0 = 1 s / 1 = 3 seconds] 109: check of fixed shadow band [0 = stop / 1 = start] 902: AC frequency display 903: the paper clutch is connected to [1] hand delivery box [0-10/6/1 MM/grade] [2] 1, 2, 3 carton [0-10/3/1 MM/stage] 908: adjusting the paper plate, adjusting the reversal time of the lifting of the upper and lower carton. [1] 1 optional [-2 - + 2/0/1 / level] [2] 2 optional [-2 - + 2/0/1 / level] SP2 (drum unit) 001: the deflection of the charging roller adjusts the [1] printing period [-2100-1500 / -1700/1V/stage] [2] ID sensor graphics [0-400/300/1v/level] The edge of [1] head [0-9/3/0.1mm/stage] [2] tail edge [0-9/4/1/0.1mm/stage] [3] left edge [0-9/2/0.1mm/stage] [4] right edge [0-9/2/0.1mm/stage] The [1] print [-1500-200/650/1v/stage] [2] ID sensor graphics [-2 = LL: 220V / -1 = L: 260V / 0 = N: 300V / 1 = H: 340V / 2 =