文档详情

解决壁挂炉常见问题分析壁挂炉节能技巧(Solving common problems of wall hanging stove and analyzing energy-saving technology of wall hanging furnace).doc

发布:2017-08-03约5.48千字共4页下载文档
文本预览下载声明
解决壁挂炉常见问题分析壁挂炉节能技巧(Solving common problems of wall hanging stove and analyzing energy-saving technology of wall hanging furnace) Although bigualu is a few problems of the heating equipment, but also does not mean that there is no problem, because the world does not exist without problems of machine, following several bigualu several common problems for analysis The fault pressure problems. The reasons for this failure is usually the pump can not operate normally, water pipes, pipe pressure gauge shows insufficient water pressure. Pressure switch fault. There are a large number of air piping system. Dont worry when this is the case, we can be a pipe for water, if the pipeline leakage, try plugging treatment. If the pressure switch is not switched on, replace the pressure switch; if the contact is re inserted; if the circuit breaker is to replace the wire; if the plug terminal is inserted in the correct wrong. The exhaust pipe system. The general problem can be solved. When the boiler controller starts the alarm, the display of water pipeline code, there will be no running water pump, fan is not running, the reason for this is the pump power line off, there is a water pump for a long time without use of locking phenomenon appears, the solution is the output power with a multimeter to detect whether the pump normal contact is good. If the controller is not output voltage controller failure, replace the controller; if the controller output voltage, the electric connector is not pump off, bad contact or disconnection of wires; off re contact, contact contact makes the good, even for wire breaking of wire. If there is a voltage input to the pump, and the pump does not turn, may be locking screw pump, boiling water on the pump with a screw, slotted screwdriver screw pump shaft, the pump rotor can be restored to normal; if the pump is not locked and with a multimeter pump test circuit or short circuit, for pump damage, replace the water pump. If the boiler pipe display lack
显示全部
相似文档