不能设IP-您为这个网络适配器输入的IP地址（Cannot set IP - the IP address you entered for this network adapter）.doc

不能设IP-您为这个网络适配器输入的IP地址（Cannot set IP - the IP address you entered for this network adapter） Problem : The IP address you input for this network adapter has been assigned to another adapter 2009-04-02 yet you enter the IP address of the XXX for the network adapter, XXX, XXX. Xx has been assigned to another adapter XXX NIC, NIC XXX hidden from the network and dial-up connections folder, since it itself doesnt exist in the computer, or a old adapter does not work. If the same addresses are assigned to two suitable devices, and both are active, only one will use this address. This can result in incorrect system configuration. Do you want to enter a different IP address from the IP address list of the advanced dialog box to the adapter? Solution: Start, execute, CMD 2. Input: set devmgr_show_nonpresent_devices = 12 Input: set devmgr_show_nonpresent_devices = 1 3. Input: start devmgmt. MSC 4. Click view to show hidden device Expand the network adapter. Remove the source of trouble! Method 2: Reasons for failure: Windows 2000 / xp will think that the network CARDS in different PCI slots are different network CARDS, regardless of whether they are actually the same or not. And, even if the nic is It was pulled down, but its configuration files have been logged into the registry by Windows. So, in the case of failure phenomenon, the system thinks You now have two network CARDS installed in your computer, but the original one has been bound to 192.168.0.1, and then another card will be bound to this IP. Solution: open the registry, find key values: [HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Class], press the original network card The information is removed from the class to find the corresponding hardware configuration information item. Note: each item contains a description of the corresponding hardware. Please make sure you dont delete it before deleting it. Note: if you are not aware of the card registry information, open the card driver folder,