燃气灶具的使用常识（Use common sense of gas cooker）.doc

燃气灶具的使用常识（Use common sense of gas cooker） Use common sense of gas cooker real estate portal - soufun - sogou home on 16 August 2007 1. How to determine if the gas cooker is leaking? When the user doubts the gas leak, please check the following steps: (1) please configure the user to configure proper amount of soapy water (preferably some) for leak detection. (2) open air valve to open air source. (3), check valve joint leakage (only applicable to liquefied petroleum gas) : dip in a small amount of soap and water, drop at the beginning of the pressure reducing valve connected to the gas tank, observe whether there are air bubbles, if there are any air bubbles, the need to consult the user change the pressure reducing valve. (4) check whether the connection of connecting hoses is leaking: experiment with the above detection method. (5) if the above method is still not able to lift the leakage phenomenon, it shall be repaired. Where is the door of the stove? What does it do? The burner and nozzle connection are equipped with two handles, one of which adjusts the small fire and the other one adjusts the fire. All of them press the spring against the burner and gently push the handle, which can adjust the size of the air hole and change the state of the flame. When combustion condition is not ideal, such as yellow, black fire, fire flame is too large or too hours, or combustion noise, the phenomenon such as tempering, through the air volume of urine into the damper can achieve ideal combustion status (square too, such as brand launched a new series kitchen without damper adjustment, can finish all adjustment in before they leave the factory, and can automatically adapt to the user home change such as air pressure, without damper on its own.) 3. How to judge that the gas cooker is full combustion? Please observe that the fire is blue when the oven is fully burnt. In addition, if the main part of the flame is blue, yellow, red flame is just floating in outer flame endings