文档详情

用于环形变压器的绕线机设计机架部分 毕业论文.doc

发布:2018-08-07约2.95万字共56页下载文档
文本预览下载声明
用于环形变压器的绕线机设计(机架部分) PAGE IV 宁波大学机械工程与力学学院本科毕业论文(设计) PAGE 1 编号:     本科毕业论文(设计) 用于环形变压器的绕线机设计(机架部分) 专 业 机械设计及其自动化(辅修国贸) 学 号 姓  名 指导教师 完成日期 宁波大学机械工程与力学学院 宁波大学机械工程与力学学院本科毕业论文(设计) PAGE 47 诚 信 承 诺 我谨在此承诺:本人所写的毕业论文《用于环形变压器的绕线机设计(机架部分)》均系本人独立完成,没有抄袭行为,凡涉及其他作者的观点和材料,均作了注释,若有不实,后果由本人承担。 承诺人(签名): 年 月 日 摘 要 摘要:为了改进绕线机的结构性能和降低生产成本,本文研究绕线机的工作原理及生产过程,将绕线机分为绕线部分和机架部分。笔者主要设计机架部分,其主要作用是支撑绕线部分,夹紧固定和低速转动环形变压器的铁芯,以及保护内部结构。结合原有的设计理念,将其划分为三个部分:驱动部分、传动部分及固定部分,驱动部分主要是电机先经过皮带再通过蜗轮蜗杆减速器传递转速,传动部分主要是由一系列的齿轮传动来实现,固定部分则通过相同转向及转速的两个主动橡胶滚轮和一个从动滚轮来对环形铁芯进行夹紧并带动其转动。在设计结构和传动方式的过程中,同时对结构的强度及转矩进行计算校核。选材方面为降低成本主要使用45钢、灰口铸铁和HT150等材料。机身骨架则采用焊接。设计中主要使用了CAD工程制图软件。 关键词:绕线机;机架部分;结构设计;夹紧及传动 Design a winding machine for the production of toroidal transformer (stander part) Abstract:In order to improve the structural performance of the winding machine and reduce production costs, this study working principle and the production process of this winding machine, and winding machine is divided into the winding portion and the stander part. This design the stander parts:the main role is to support the winding part of the clamp fixed and low-speed rotating toroidal transformer core, and protect the internal structure. Combined with the original design concept, this structure can be divided into three parts: the drive part, transmission part and fixed part.The drive part go through a belt and give the speed to worm gear reducer, transmission parts is made up of a series of gears to make achieve the work.The fixed part is made up of two same steering and speed active rubber roller and a follower wheel clamping ring core to achieve the work. In the process of designing structure and transmission mode, check the structural strength and torque calculation. In order to reduce the costs, choose the material of 45 steel and gray cas
显示全部
相似文档