开机速度慢（Slow down）.doc

开机速度慢（Slow down） 1. Optimize the computer with the optimization master, open the optimized master - system optimization - startup speed optimization - start the stay time, and select direct access. Ii. Dust removal, clean up disk and defragment disk. 1. Open the box and remove the dust and insert all the connections into the cage. 2. In my computer window, right - click the disk character - property - clean disk - check the file to be deleted - yes. Clean up the registry and garbage files with the optimized master or super rabbit. 4. Organize the disk fragments -- start -- all procedures -- attachment -- system tools -- disk defragmenter -- select C -- analysis -- defragmentation. 3. The hard disk and optical drive are located in the main disk position (Master), the hard disk is IDE1, and the optical drive is IDE2. The hard drive should use the 80 core data line. 4. Optimize the BIOS Settings. 1. Enter the BIOS to change the default Settings to optimize Settings. 2. Close the floppy drive. 3. Turn off the boot floppy drive detection function. 4. Open the self-check function quickly 5. Set the hard disk to the first boot. Fifth, optimize computer setup. 1. Disable idle IDE channels. Right click on the my computer - attribute, hardware, device manager, in which to open the IDE ATA/PATA controller and then enter the primary and secondary IDE channel respectively, choose the advanced Settings, set device type to no, the transfer mode to the DMA (if available. 2. On the desktop my computer - attributes - advanced - start and troubleshooting - remove two check - out of the default operating system. 3. Close some startup programs. Start - run - enter msconfig - sure - in the system configuration utility window click on the start - activates, in addition to the input technology (Ctfmon), antivirus software, general program can turn off (remove the tick). 4. Disable redundant services. Right click on my computer - manage - service and application - service, and set unneeded