API WELDING PROCEDURE SPECIFICATION API （API焊接工艺规范API）.pdf

API WELDING PROCEDURE SPECIFICATION WPS: API 1000-13 REV. NO.: 0 PROCESS: SMAW DATE: 10/11/2005 API-1104 QUALIFIED RANGES Diameter: 2.375” od. thru 12.75” od. Filler Metal Group: API Group 3 Thickness: .154” thru .750” Joint Type: Sleeve/fillet/butt full penetration Material: Yield less than 42 Kpi Position’s: Fixed: All Rolled: Progression: V/Up Down NOTE: This WPS shall be used in conjunction with the applicable sections of the Los Alamos National Laboratories Welding Standards Manual (GWS) WELD JOINT: Type: Sleeve/fillet/butt ~371/2° Class: Full Partial Penetration Joint Description: Sleeve weld for In-service hot-tap (per 1104 App. B) (Mueller stop/plug fitting) Sketch Number: See pg. 2 for typical sketch and bead sequence. FILLER MATERIALS: API Group No.: 3 AWS Class: E-6010 E-7018 SFA Class: 5.1/5.5 F No.: 3/4 Sizes (s): 1/8 5/32 5/32 Number of Beads: See pg. 2 for typical number and of beads BASE MATERIALS: Spec: ASTM A-53 or A-106 Gr. B to Spec: ASTM A-53 or A-106 Gr. B Thickness Welded: .154” - .750” to .154” - .750” Pipe Diameter: 2.375” OD. thru 12.75” OD. pipe to Pipe Diameter Less than 12.75” OD. ASME P No.: 1 Group: 1 to P No.: 1 Group: 1 POSITIONS: Fixed: All positions PWHT: Time @ º F Temp.: N/A Progression: V/Up/Dn (E-7018 E-6010) Temperature Range º F: N/A PREHEAT: X Minimum Temp