LB 983简化使用说明.pdf

Quick Start LB 983 NightOWL II Operating Manual 4.2 First Acquisitions 4.2.1 Defining the First Application indiGO differentiates between different measurement methods (e.g. luminescence measurement, fluorescence measurement) by defining certain applications. For example, the measurement mode, the exposure time, the measurement sequence and, possibly, the filter setting can be defined. You must have at least Project Manager status to define an application. Otherwise, the function is not available to rule out faulty operations. Click on the Application – New button to start the assistant for creating a new application. The assistant appears and you first have to enter a name for the application you want to define. You can also add a descriptive comment. Next, you have to define the type of analysis. Three variants are available:  Single Image Single samples are measured. Only one sample is measured per analysis. The sample IDs are freely defined during the analysis.  Multiday Analysis Several analysis per sample are possible. Thus, studies over several days are possible. The sample IDs can be pre-defined in the project.  Multiday Multisample Analysis Several samples can be measured with one analysis which will then be di- vided into single measurements by the program. The entire process can be carried out several times, i.e. over several days. 20 LB 983 NightOWL II Operating Manual Quick Start Select Single Image and click to go to the next page of the application assistant. Here you can select the filter slider for the excitation or the filter wheel for the emission required for the measurement. Since the first measurement has to be a luminescence meas