电梯安装、维保电梯钢丝绳存放、安装、使用及维保注意事项文库（Elevator installation, maintenance, elevator wire rope storage, installation, use and Maintenance Notes Library）.doc

电梯安装、维保电梯钢丝绳存放、安装、使用及维保注意事项文库（Elevator installation, maintenance, elevator wire rope storage, installation, use and Maintenance Notes Library） Elevator installation, maintenance, elevator wire rope storage, installation, use and maintenance notes, library.Txt cherish life - God also allows you to live, there must be his arrangements. Lei Feng does good without seeking recognition, but everything diary. Elevator installation, maintenance, elevator rope storage, installation, use and Maintenance Notes Deposit： 1 the steel rope should be hoisted according to the hoisting mark on the surface of the wooden shaft so as not to cause damage to the wooden shaft or packing or the surface of the steel wire. 2, steel rope should be placed in a dry ventilated place, do not rain or with acid, alkali contact. Installation: 1 wire rope in installation and cut to length should be flat on the rope shaft bracket, clockwise to put the rope round the side scrolling direction according to the identification, in order to avoid the stress of wire rope drive. 2, the installation of steel wire rope should be avoided by the surface of the hard wear, scraping and injury to debris, otherwise it will cause damage to the traction wheel and wire rope. 3 in the installation of wire rope, should try to shorten the time to hang freely, otherwise the rope due to its gravity free rotation, or even destroy the wire rope twisting parameters, local relaxation caused by wire rope, wire rope at work instead of steel wire rope core stock force, the first fiber core is destroyed, and seriously reduce the service life of the wire rope. 4 when the steel wire rope is installed, the internal stress of the wire rope should be fully eliminated (that is, sufficient release), and then the ends of the wire rope shall be fixed. In order to avoid the local stress concentrated in the operation of the steel rope, the utility model can cause rotation or deformation, and the running of the elevator is not stable, so that th