BIOS方式安装、引导GPT分区单硬盘中的win7和win8系统问题（国外英文资料）.doc

BIOS方式安装、引导GPT分区单硬盘中的win7和win8系统问题（国外英文资料） BCD that does not change partition can start normally; Copy the win7_x32. VHD from the GPT partition to the MBR partition disk, and do not change the BCD. Mount win7_x32.vhd on the GPT partition, start with Qemu, and start the test mount with Qemu, and the BCD in it will also start normally. But this step changes the BCD, which must be modified for the start of the next step. (2) install the iso installed in the GPT partition by downloading the packaged win7_x32 clone from the Internet Tested, and the way to (a) basic same, but beware: a first cloned from iso file to partition, because in the system when drive information encapsulation has been cleaned, registered dial operator to clear this is not done. Second, some netizens said, the system clone to GPT partition hard drive in the first four partitions, the odds of success be larger, after the installation is complete to be cloned to 5 - n (n up to 128) in a GPT partition, but remember to register the dial operator cleaning. (3) install the win7_x32 system installed in the MBR or GPT partition as the VHD system Copy the 32-bit system of WIN7 to win7_x32.gho. Using the Windows_VHD_VHDX auxiliary processing tool (2013_2.25), choose win7_x32_gpt. VHD, which is stored in the GPT partition (such as the sixth partition). Under winpe, mount win7_x32_gpt. VHD. Use the skyiar tool to drive the ahci hard drive mode. Clear the registry for win7_x32_gpt. VHD. In the third step of the (1) step, it is only the disk character that has been mounted on the previous step that has been mounted win7_x32_gpt. VHD, not the disk character of the GPT partition where the win7 system, as it was described in step 3, is located. Bootice1.321 edits the BCD under the boot directory in win7_x32_gpt. (4) activation of the system Soft activation software: failure The nt6.x and the VHD system installed in the GPT partition will not be activated by the soft activation software such as Windows 7 Loader 1.9.