文档详情

UPS检测报告单.doc

发布:2017-03-21约7.87千字共8页下载文档
文本预览下载声明
Three Phase Input/Three Phase Output 10/30KVA UPS Shipment Accessories NO P/N Description Qty Unit Operator Qc Remark 1 TD33 UPS System User Manual 1 EA 2 UPS Warranty 1 EA 3 UPS Installation Report 1 EA 4 Terminal Embedded Software,Monitoring Software And Disk 1 EA 5 System Test Report 1 EA 6 RS232 Connecting Wire 1 EA 三进三出10/30KVA UPS发货附件清单 序号 项目编码 项目描述 数量 单位 点料员 检验员 备注 1 TD33系列UPS系统用户手册 1 EA 2 UPS电源保修单 1 EA 3 UPS设备安装报告 1 EA 4 终端物理元件-监控软件单机版和光盘 1 EA 5 系统测试报告 1 EA 6 RS232连接线 1 EA UPS检测报告单 UPS INSPECTION REPORT 对外型号 Model 系统条码 System serial number UPS系列: UPS Serial: 类别 Category 代码 Code 检验项目 Inspection Item 检验标准 Inspection standard 检测结果 Inspect result A外观 Appearance A1 表面、丝印、标识 Surface,Screen Printing,Marking 无明显凹痕、划伤、裂隙、变形、脏污、色差。标识内容和位置正确,无缺划。 No evident dent、destruct、cranny、distortion、dirty、chromatic aberration,Correct Content and Location,No Lack strokes of font. □ OK □ NG A2 结构件 Mechanical component 各结构件外观良好,连接良好,各活动门开关正常 Finish and cosmetic meet corporation standard,mechanical components comply with the drawing and are well connected,hinge are flexible □ OK □ NG A3 器件和开关功能 Electrical part and switch function test 型号正确、安装紧固到位,开关功能检测正常 Correct model,tightly mounted,switches function meet test Spec. □ OK □ NG A4 配线工艺 Wiring and binding 各连接电缆连接紧固,走线符合工艺要求 All cables are well fastened and meet craftsmanship requirement □ OK □ NG B电气性能测试 Electrical Performance B1 绝缘电阻 Insulation Resistance 输入端、输出端对地施加500V直流电压,绝缘电阻≥2MΩ Input and output to ground R≥2MΩ with 500Vdc □ OK □ NG B2 接地电阻 Earth Resistance 系统内等电位金属结构件与接地排之间的电阻<0.1Ω Resistance between Mechanical component and ground bus-bar<0.1Ω □ OK □ NG B3 绝缘强度 Dielectric Strength 漏电流≤1mA(2820Vdc,1min,无击穿或飞弧) Leakage current≤1mA(2820Vdc,1min without arc or breakdown) □ OK □ NG B4 对地漏电流 Earth leakage current 正常工作时≤3.5mA,若机箱上贴有告警标签,则不超过输入电流的5% Normal work≤3.5mA,If there is alarm label in enclosure,It can not exceed 5% input c
显示全部
相似文档