低碳贝氏体桥梁钢中温转变组织控制.pdf
文本预览下载声明
2007 中国钢铁年会论文集
低碳贝氏体桥梁钢中温转变组织控制
李 静 1 王 华 1 马玉璞 1 李 云 1 李 英 2*
(1. 鞍钢股份有限公司,鞍山 114021 ;2. 鞍钢集团公司设计研究院,鞍山 114021 )
摘 要 研究了低碳500MPa 级高性能桥梁钢的等温转变组织控制,同时模拟变形奥氏体冷却过程各类组织的连续
转变情况,确定冷却开始温度,冷却速度和终冷温度。研究表明,0.04%C 的微合金钢在一定冷却速度范围内
(1~10℃/s )均可得到低碳贝氏体组织。当终轧后加速冷却时,开始冷却的温度应在 650℃以上,终冷温度应控制
在600~550℃之间,能得到较均匀的粒状贝氏体组织为主的相变产物。
关键词 高性能 中温转变 低碳贝氏体组织
Intermediate Transformation Structures in a Low Carbon bainitic
Steels of Bridge Steel
Li jing1 Wang Hua1 Ma Yupu1 Li yun1 Li ying2
(1.Angang Steel Company Limited.,Anshan,114021;
2. Engineering Research Institute of Angang Group,Anshan,114021 )
Abstract The isothermal Transformation microstructure of high performance bridge steel has been investigated,
Simulating the austenite continuous various structure in continuous cooling , determined the starting temperature,cooling
rate,final temperature during cooling 。The results show that lath bainitic ferrite can be formed. For the lower carbon content
steel( 0.04%C), cooled at 1~10℃/s. The multi-phase low carbon bainitic structure can be transformed, when the start
temperature is up 650 ℃ and final is 600~ 550 ℃.
Key words high performance , intermediate transformation, low carbon bainitic microstructure
国际上桥梁用钢的发展经历了很长的历史时期,其大概可分为三个阶段:早期主要采用含碳量较高的普
通低合金钢,如 16Mn 类型低合金钢及20 世纪30 年代美国发展的Corten 系列耐蚀桥梁钢。第二代桥梁钢
组织为针状铁素体和粒状贝氏体。近年来为了更好的解决桥梁钢的焊接及耐蚀问题,国际上发展了一系列超
低碳贝氏体型第三代桥梁钢[1,2] [3,4]
,这类钢性能的控制主要是通过微合金成分和控轧控冷工艺来实现的 ,它
[5]
的最主要
显示全部