一些硬盘维修经验及资料（Some hard disk maintenance experience and data）.doc

一些硬盘维修经验及资料（Some hard disk maintenance experience and data） Some hard disk maintenance experience and data [Author: laijinquan posted from: Freshwater traceless hits: 557 update time: 2005-9-24 entry: laijinquan] Some hard disk maintenance experience and data Please use the recommended / collection function recommended to the following links, let more people share together! 365key | | Abstract | | eFriendsNet Gaga gaming center and | Author: Ju Zhongshan article source: this site original hits: 252 update time: 2005-8-3 Break through the red and green blocks and smaller faults after the MT 2B020H1 rewrite firmware 3000 do with self calibration, and then use the MHDD29 inside the AERASE wipe once, and then the efficiency of source 2B ctrl+c HDD repair free version of the threshold is set to 1 can be I dont know what the moderator says. Do self calibration with 3000, dont you?: The hard disk jumps to normal mode, enters pc3000., enters selfscan., calls the first entry, returns (and returns to the main menu) At this time, manually press the F12 power (manually pull the hard disk power plug is also OK).3 seconds, press the F11 button (manual plug in power will do), and then go to selfscan., select the third call (if the beging appears, then the call succeeded) Note: at this point the numbers will not move. (some wait for about a minute to run, OK) Then finish. Quit pc3000, hard disk power off *********************************************************** 1, set as safe mode. 2, load LDR and RAM files, enter the standard mode. 3, check the structure, write down the module number which can not be correctly read out, moreover, the 33# module must be included. 4. Write to the module (provided that there is a good module in advance). 5, clear G-LIST and P-LIST (may not succeed). 6, select start Selfscan, Turn off the power and turn the skip to normal mode to open the power. View the Selfscan state for about one minute 0000, if there is no 0000, it may not be written properly be