《微带带通滤波器的设计和实现》-毕业论文.doc
文本预览下载声明
本科毕业论文(设计)
题目: 微带带通滤波器的设计和实现
姓 名: 学号: 20081004182
院(系):机械与电子信息学院 专业: 电子信息工程
指导教师: 职称: 讲师
评 阅 人: 职称: 副教授
2012 年 6 月
摘 要
近几年随着商用无线通信的迅猛发展,射频/微波电路越来越得到重视和发展。微带带通滤波器作为微波器件的一种也得到了大力的发展,尤其是在接收机前端。带通滤波器即BPF(band-pass filter)是一个允许特定频段的波通过同时屏蔽其他频段的设备,一个理想的带通滤波器应该有一个完全平坦的通带,另外,通带外的转换在极小的频率范围完成。带通滤波器在无线通讯、图像处理和遥控遥感等各方面得到重要应用。因此,发展高性能,研究小型化的带通滤波器是当前非常受关注的课题。
本文首先介绍了微波滤波器的应用和当前的研究情况。然后介绍了滤波器的理论基础和重要参数。最后该论文基于仿真软件ADS和公式的基础上,介绍了微带线带通滤波器的设计方法,同时借助ADS软件对所设计的微带线滤波器进行了仿真和优化,最终得到比较理想的微带线滤波器。在进行原理图设计、仿真和优化的过程中,重点内容是原理图的绘制和S参数的优化。在已知公式和表格的基础上,能够计算出滤波器的各种参数,利用这些参数能够绘制原理图;S参数的优化主要是优化范围的修改和一个不断重复的过程。本次设计所完成的滤波器如下:通带1.9-2.0 GHz,带内衰减小于2dB,起伏小于1dB,1.7GHz以下及2.2GHz以上衰减大于40dB。
试验结果表明,基于微波仿真软件ADS的微带线带通滤波器能够顺利实现,并且重要参数能够较好的控制在所要求的范围内。
关键词: 微带线 微带带通滤波器 仿真软件ADS
Abstract
In recent years, along with the high development of wireless communication in business, Microwave RF circuit has been attracted more and more attention and also got many achievements. At the same time, as one of the important microwave components, the microstrip band-pass filters also developed rapidly in recent years. Especially, the microwave BPF directly influences the Performances of the receivers. Band-pass filter namely BPF(band-pass filter) is a device which allow specific frequency range and shield other range. A ideal band-pass filter has a completely flat passband and the transition should be in a infinitesimal frequency range. Band-pass filter get a wide range of applications in many directions such as wireless communication, image processing and remote sensing. An So, develop high Performance, study miniaturized microwave filter is a hot topic in nowadays.
At first, this paper introduces the application of microwave filters, and the current state of studying the filters. Then introduces the theory basis and important parameter. With the software ADS and the formula, this paper
显示全部