如何设置BIOS,提高开机速度（How to set up BIOS and improve boot speed）.doc

如何设置BIOS,提高开机速度（How to set up BIOS and improve boot speed） 1. Optimize startup speed Every time the computer has to wait a long time to enter the system, how can it get into the system faster? The following USES a BIOS method to optimize boot startup speed. 1. How to open the quick start self-checking function After starting the computer, the system performs its own routine of self-checking, a process known as the Power On Self Test, which detects nearly all of the systems hardware. Follow these steps to quickly check the function and speed up the startup. Step 1 start the computer, press the Del key, and enter the BIOS to set the main interface. Step 2 select Advanced BIOS Features (Advanced BIOS Settings feature) to set items and press Enter to Enter. Step 3 move the cursor to Quick Power On Self Test, set to Enabled (allow). If you choose Disabled, the computer will perform the boot self-check at normal speed and check memory three times. Step 4 return to the main interface by pressing the Esc key, move the cursor to Save Exit Setup (store and end Settings), press Y to Save the Exit. 2. How to turn off the boot floppy drive detection function Step 1 open the Boot Up Floppy Seek (Boot Floppy drive detection) function to detect the 1.44 MB Floppy drive at startup, which causes a delay of about 1 to 2 seconds. To speed up the startup, you can close this feature. Step 2 start the computer and press the Del key to enter the BIOS to set the main interface. Step 3: set Boot Up Floppy Seek as Disabled to turn off the Boot Floppy drive detection function. 3. How to set the hard disk to be the first boot disk In the BIOS, you can choose a floppy disk, hard disk, CD, usb, etc. But in general, it starts with a hard disk. You can set the first boot disk in the BIOS Settings to speed up the boot. Step 1 start the computer and press the Del key to enter the BIOS to set the main interface. Step 2 select the Advanced BIOS Features setting item press Enter. Step 3 sets the First