GP68对讲机编程说明书（国外英文资料）.doc

GP68对讲机编程说明书（国外英文资料） 3 023 141.3 003 71.9 024 146.2 004 74.4 025 151.4 005 77.0 026 156.7 006 79.7 027 162.2 007 82.5 028 167.9 008 85.4 029 179.8 009 88.5 030 178.9 010 91.5 031 011 94.8 032 012 97.4 033 013 100 034 014 103.5 035 015 107.2 036 016 110.9 037 017 114.0 038 018 115.8 039 019 123.0 040 020 127.3 041 Single-frequency single-operator channel change and storage: Under channel number, press PTT + green key + D and turn on the power. Press yellow for 3 seconds Clock, system enters full digital channel display status, can enter frequency with numeric keyboard, or use channel spin Button select frequency. After selecting the frequency, press the yellow key for 3 seconds, enter the channel selection/storage status, and use The channel selected the channel on the yellow key. When all channels are saved, press X The incoming channel displays status. Two. The change and storage of the single channel of the different frequency: First select the receive frequency, then press the key for 3 seconds, the LCD display + -, set the hair The frequency of the shot is determined by the key of the key, and the key to the LCD is displayed multiple times. According to the yellow For 3 seconds, enter the channel selection/storage status, select the channel, press the yellow key store channel. Select channel interval: Press the LOW button for 3 seconds and select the channel interval from the channel selection button. Special programming mode (SPM) lookup table · rotate select button to select channel project. · use either the arrow or the light. * press the backlight switch/determine the key button (yellow key). Scn. Channel scan program - ErA. Chn channel clearing table programming - Phn. Acc There is a call button identification code for the call button - ToT. XXX do send timed functional programming - Sc - On/Sc - cancel the selected calling signal left OFF § enabled This is the same as the dissonant, which is used to set the alarm signal The bs-off/bS/bs-enh sets the batte